 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 45 Features * * * * * EMI filtering 8 and 12 Amp versions CE Marked Micro-size package Low profile mounting option Data Sheet FM48 TM FiltMod Input Filter Module Shown actual size: 2.28 x 1.45 x 0.5 in 57,9 x 36,8 x 12,7 mm Absolute Maximum Rating Parameter +In to -In +In to -In +Out to -Out Mounting torque Pin soldering temperature Pin soldering temperature Storage temperature C-,T-Grade Operating temperature C-Grade Operating temperature T-Grade Rating Unit 80 Vdc 100 V 75 Vdc 5 (0.57) in-lbs (N-M) 500 (260) F(C) 750 (390) F(C) -40 to +125 C -20 to +100 C -40 to +100 C Notes Continuous 100 ms Continuous <5 sec, wave solder <7 sec, hand solder Products Highlights The FM48 input filter module enables designers to meet the conducted emission limits of EN55022 Level B and FCC Level B when used with Vicor's 48 Volt 2nd Generation of DC-DC converters. FiltMods accept an input voltage of 36 to 76Vdc with a transient withstand capability of 100 Vdc for 100 msec. The FiltMods are packaged in an industry standard "quarter-brick" module measuring 2.28" x 1.45" x 0.5" and are available in either 8 or 12 Ampere capacity. Both versions may be on-board or in-board mounted for height critical applications. The FiltMods can be used with Vicor's IAM48 for transient and surge protection. Baseplate Baseplate FM48-FiltMod Specifications (At TBP = 25C, nominal line, 75% load, unless otherwise specified) Parameter Input voltage Safety approvals Dielectric withstand EMI/ RFI Min Typ Max 36 Vdc 48 Vdc 76 Vdc UL 1950, CSA 22.2-950, EN 60950 1,500 Vrms Telcordia GR-001089-Core Issue 2 EN 55022 Level B FCC Part 15 Level B 8A 12 A Remarks Input /Output to base When used with Vicor 2nd Generation 48Vin DC-DC converters Compatible Products * IAM48 * 2nd Generation 48 V input DC-DC converters Output current FM4808C12 FM4812C12 Reverse polarity protection Weight 2.1 ounces (60 grams) Delivered current to any combination of Vicor's 2nd Generation 48Vin DC-DC converter No damage to unit, external fusing required Product Grade Specifications Parameter Storage temp. Operating temp. (baseplate) Warranty C-Grade -40C to +125C -20C to +100C 2 years T-Grade -40C to +125C -40C to +100C 2 years Note: For alternative product grades, change the "C" in the part number to "T". Part Numbers FM Product 48 Input Voltage 08 Output Current 08= 8 Amp 12=12 Amp C Product Grade C=-20 to 100C T=-40 to 100C 1 Baseplate 1=Slotted 2=Threaded 3=Thru-hole 1 Pin Style 1= Short Pin 2= Long Pin S= Short ModuMate N= Long ModuMate Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 FM48, Filter Module Rev. 2.3 Page 1 of 4 Set your site on VICOR at www.vicorpower.com Conducted Noise Figure 1-- FM4812C12 and Model V48A12C500A DC-DC converter. Figure 2--FM4812C12 and Model V48B24C250A DC-DC converter. Typical Transient, Surge Protection and Filtering Solution Note: The IAM48 is shown in the on state. To disable, open the connection to pin 3. -IN -IN 5 - IN NC NC +IN - OUT - IN NC + IN - OUT 1 2 4 3 2 7 NC -OUT PR PC +IN 3 FM48 GND + OUT IAM48Off/On IAM2 7 +IN +OUT 4 2nd Generation 48Vdc Input DC-DC Converters -S SC +S +OUT 6 6 1 5 Figure 3 Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 FM48, Filter Module Rev. 2.3 Page 2 of 4 Set your site on VICOR at www.vicorpower.com Mechanical Drawings (FM48-FiltMod) Module Outline No. 1 2 3 4 5 6 7 PIN OUTS Function Label +Vin +V N/C N/C -Vin -V -Vout -V Ground +Vout GND +V 0.50 0.02 12,7 0,5 0.800 20,32 0.525 13,34 0.235.015 5,970,38 (REF) style 2 & 3 baseplates only (4X)*** 0.01 0.275 0.12* 0.20** 3,1 5,08 0.49 12,4 6,99 1.27 32,3 0.490 .015 1 (ALL MARKINGS THIS SURFACE) 2 3 4 12,45 0,38 (REF) 0.27 (2X) 6,9 0.65 16,5 1.30 33,0 0.09 2,3 0.10 X 45 2,5 CHAMFER 0.350.015 8,890,38 (REF) 2.000 50,80 ALUMINUM BASEPLATE 2.28 57,9 FULL R (6X) 0.13 (6X) 3,3 7 6 5 0.080 DIA. (7X) 2,03 0.400 10,16 1.04 26,4 1.45 36,8 0.43 10,9 0.54 (7X) 13,7 R 0.06 (3X) 1,5 Slotted (Style 1) or Threaded (Style 2) 4-40 UNC-2B (6X) 0.21 5,2 (REF) Pin Style 1&S (Short Pin) 1.45 36,8 (REF.) Use a 4-40 Screw (6x) Torque to: 5 in-lbs 0.57 N-m 0.62 (7X) Pin Style 2&N 15,7 (Long Pin) or Thru Hole (Style 3) #30 Drill Thru (6X) (0.1285) * Style 1 baseplate only ** Style 2 & 3 baseplates *** Reserved for Vicor accessories Not for mounting PCB Mounting Specifications ALL MARKINGS THIS SURFACE PCB THICKNESS 0.062 0.010 1,57 0,25 0.800* 20,32 0.525* 13,34 0.275* 6,99 0.170* 4,32 PLATED THRU HOLE DIA 0.133 3,38 1 2 3 4 INBOARD SOLDER MOUNT PIN STYLE 1&S (7X) 0.094 0.003 2,39 0,08 ONBOARD SOLDER MOUNT PIN STYLE 2&N 0.094 0.003 2,39 0,08 ALUMINUM BASEPLATE PINS STYLES STYLE 1 & 2: TIN/LEAD HOT SOLDER DIPPED STYLE S & N: GOLD PLATED COPPER 2.000* 50,80 1.734** 44,04 7 0.06 (4X) 1,5 6 5 Unless otherwise specified, dimensions are in inches mm Decimals 0.XX 0.XXX Tol. 0.01 0.25 0.005 0.127 1 Angles R .400* 10,16 1.140** 28,96 *DENOTES TOL = 0.003 0,08 **PCB WINDOW 0.43 10,9 0.53 13,5 Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 FM48, Filter Module Rev. 2.3 Page 3 of 4 Set your site on VICOR at www.vicorpower.com Vicor's comprehensive line of power solutions includes high density AC-DC and DC-DC modules and accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom power systems. Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to Vicor's Terms and Conditions of Sale, which are available upon request. Specifications are subject to change without notice. 45 Component Solutions for Your Power System Vicor Corporation 25 Frontage Road Andover, MA, USA 01810 Tel: 800-735-6200 Fax: 978-475-6715 Email Vicor Express: vicorexp@vicr.com Technical Support: apps@vicr.com Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 FM48, Filter Module P/N23295 Rev. 2.3 05/04/10M Set your site on VICOR at www.vicorpower.com |
Price & Availability of FM4808C1N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |